Finite Element Simulations with ANSYS Workbench 16

by Huei-Huang Lee, NCKU, Taiwan

 

(Video 05:29) Section 02-1  W16x50 Beam

(Video 05:16) Section 02-2  Triangular Plate

(Video 05:31) Section 02-4  M20x2.5 Threaded Bolt

(Video 06:46) Section 02-5  Spur Gears

(Video 08:23) Section 02-6  Microgripper

(Video 07:05) Section 03-1  Triangular Plate

(Video 09:44) Section 03-2  Threaded Bolt-and-Nut

(Video 05:45) Section 03-4  Spur Gears

(Video 11:59) Section 03-5  Filleted Bar

(Video 03:50) Section 04-1  Beam Bracket

(Video 12:15) Section 04-2  Cover of Pressure Cylinder

(Video 06:39) Section 04-3  Lifting Fork

(Video 06:33) Section 04-5  LCD Display Support


(Video 04:12) Section 05-1  Beam Bracket

(Video 04:23) Section 05-2  Cover of Pressure Cylinder

(Video 03:20) Section 05-4  LCD Display Support

(Video 07:50) Section 06-1  Bellows Joints

(Video 05:29) Section 06-2  Beam Bracket

(Video 11:37) Section 06-3  Gearbox

(Video 08:00) Section 07-1  Flexible Gripper

(Video 11:56) Section 07-2  3D Truss

(Video 13:18) Section 07-3  Two-Story Building

(Video 07:51) Section 08-1  Flexible Gripper

(Video 05:51) Section 08-2  Triangular Plate

(Video 11:59) Section 09-1  Pneumatic Fingers

(Video 05:25) Section 09-2  Cover of Pressure Cylinder

(Video 11:37) Section 09-3  Convergence of 3D Elements

(Video 07:58) Section 10-1  Stress Stiffening

(Video 02:19) Section 10-2  3D Truss

(Video 02:25) Section 10-3  Beam Bracket

(Video 02:19) Section 11-1  Gearbox

(Video 04:18) Section 11-2  Two-Story Building

(Video 05:45) Section 11-3  Compact Disk

(Video 03:59) Section 11-4  Guitar String

(Video 07:24) Section 12-2  Lift Fork

(Video 04:03) Section 12-3  Two-Story Building

(Video 08:37) Section 12-4  Disk and Block

(Video 05:35) Section 12-5  Guitar String

(Video 09:47) Section 13-2  Translational Joint

(Video 11:33) Section 13-3  Microgripper

(Video 14:18) Section 13-4  Snap Lock

(Video 11:36) Section 14-2  Belleville Washer

(Video 14:17) Section 14-3  Planar Seal


(Video 05:43) Section 15-2  High-Speed Impact

(Video 08:05) Section 15-3  Drop Test

(Finished Project File) Sec 02-1

(Finished Project File) Sec 02-2

(Finished Project File) Sec 02-4

(Finished Project File) Sec 02-5

(Finished Project File) Sec 02-6

(Finished Project File) Sec 03-1

(Finished Project File) Sec 03-2

(Finished Project File) Sec 03-4

(Finished Project File) Sec 03-5

(Finished Project File) Sec 04-1

(Finished Project File) Sec 04-2

(Finished Project File) Sec 04-3

(Finished Project File) Sec 04-5

(Finished Project File) Sec 04-6-2

(Finished Project File) Sec 05-1

(Finished Project File) Sec 05-2

(Finished Project File) Sec 05-4

(Finished Project File) Sec 06-1

(Finished Project File) Sec 06-2

(Finished Project File) Sec 06-3

(Finished Project File) Sec 07-1

(Finished Project File) Sec 07-2

(Finished Project File) Sec 07-3

(Finished Project File) Sec 08-1

(Finished Project File) Sec 08-2

(Finished Project File) Sec 09-1

(Finished Project File) Sec 09-2

(Finished Project File) Sec 09-3

(Finished Project File) Sec 10-1

(Finished Project File) Sec 10-2

(Finished Project File) Sec 10-3

(Finished Project File) Sec 11-1

(Finished Project File) Sec 11-2

(Finished Project File) Sec 11-3

(Finished Project File) Sec 11-4

(Finished Project File) Sec 12-2

(Finished Project File) Sec 12-3

(Finished Project File) Sec 12-4

(Finished Project File) Sec 12-5

(Finished Project File) Sec 13-2

(Finished Project File) Sec 13-3

(Finished Project File) Sec 13-4

(Finished Project File) Sec 14-2

(Finished Project File) Sec 14-3

(Testdata.xls) Test Data Sec 14-3

(Finished Project File) Sec 15-2

(Finished Project File) Sec 15-3

Tutorial Videos and Finished Project Files

1. The videos have a maximum resolution of 1920x1080 (HD).

2. To reduce file size, the project files were saved with Workbench GUI command /File/Archive...; i.e., they are in WBPZ compressed format.  To open a compressed project file, please use  Workbench GUI command /File/Restore Archive...

3. The project files are to be used with ANSYS16 (or later); they are not to be used with ANSYS15 or earlier versions.

4. It is suggested that, whenever a project file is needed to start up an exercise, you use a project file provided here, rather than your own finished project file, so that your numerical results would be more consistent with those in the textbook.

To order this book, please visit

SDC Publications or Amazon.com