Finite Element Simulations with ANSYS Workbench 2020

by Huei-Huang Lee, NCKU, Taiwan

 

(Video 07:53) Section 02-1  W16x50 Beam

(Video 08:29) Section 02-2  Triangular Plate

(Video 08:59) Section 02-4  M20x2.5 Threaded Bolt

(Video 13:37) Section 02-5  Spur Gears

(Video 16:02) Section 02-6  Microgripper

(Video 11:25) Section 03-1  Triangular Plate

(Video 19:22) Section 03-2  Threaded Bolt-and-Nut

(Video 09:17) Section 03-4  Spur Gears

(Video 21:01) Section 03-5  Filleted Bar

(Video 08:00) Section 04-1  Beam Bracket

(Video 29:15) Section 04-2  Cover of Pressure Cylinder

(Video 10:52) Section 04-3  Lifting Fork

(Video 12:09) Section 04-5  LCD Display Support

(Video 08:31) Section 05-1  Beam Bracket

(Video 11:00) Section 05-2  Cover of Pressure Cylinder

(Video 06:44) Section 05-4  LCD Display Support

(Video 15:18) Section 06-1  Bellows Joints

(Video 08:38) Section 06-2  Beam Bracket

(Video 24:43) Section 06-3  Gearbox

(Video 14:45) Section 07-1  Flexible Gripper

(Video 16:19) Section 07-2  3D Truss

(Video 26:46) Section 07-3  Two-Story Building

(Video 13:24) Section 08-1  Flexible Gripper

(Video 10:51) Section 08-2  Triangular Plate

(Video 23:44) Section 09-1  Pneumatic Fingers

(Video 12:56) Section 09-2  Cover of Pressure Cylinder

(Video 14:20) Section 09-3  Convergence of 3D Elements

(Video 14:53) Section 10-1  Stress Stiffening

(Video 02:47) Section 10-2  3D Truss

(Video 03:54) Section 10-3  Beam Bracket

(Video 05:40) Section 11-1  Gearbox

(Video 07:10) Section 11-2  Two-Story Building

(Video 15:30) Section 11-3  Compact Disk

(Video 08:04) Section 11-4  Guitar String

(Video 18:57) Section 12-2  Lift Fork

(Video 09:11) Section 12-3  Two-Story Building

(Video 19:14) Section 12-4  Disk and Block

(Video 13:12) Section 12-5  Guitar String

(Video 25:44) Section 13-2  Translational Joint

(Video 22:46) Section 13-3  Microgripper

(Video 30:56) Section 13-4  Snap Lock

(Video 26:57) Section 14-2  Belleville Washer

(Video 30:17) Section 14-3  Planar Seal

(Video 17:47) Section 15-2  High-Speed Impact

(Video 22:03) Section 15-3  Drop Test

Tutorial Videos and Finished Project Files

1. To reduce file sizes, the project files were compressed in ZIP format.  Decompress a file before it is opened with ANSYS Workbench.

2. The project files are to be used with ANSYS2020 (or later); they are not to be used with ANSYS2019 or earlier versions.

3. It is suggested that, whenever a project file is needed to start up an exercise, you use a project file provided here, rather than your own finished project file, so that your numerical results would be more consistent with those in the textbook.

To order the book, please visit

SDC Publication or Amazon


This page will no longer be available after August 1, 2001.  This page has been duplicated and moved to a new website.  Please visit the new website:


http://lab.es.ncku.edu.tw/hhlee/Site/ANSYS2020.html